4
Lindab reserves the right to make changes without prior notice
2021-11-02
UltraLink
®
Monitor
FTMU
lindab | technical information
Mounting
Please note:
•
The transducers must never be removed!
•
Do not use the transducers as handles when you mount the
FTMU since this may cause damage!
Transducers
•
Make sure the airflow arrow is pointing in the direction of the
airflow.
Airflow direction arrow
•
Rotate the senor body to the correct position according to
the chapter
•
Position the display so it is visible from a suitable direction.
By loosening the screw of the steel strip, the display unit can
be rotated.
•
Mount the FTMU into the air duct system according to the
mounting instructions for Lindab Safe.
•
Never use a FTMU on the outlet side of a duct fan. (Place it
on the inlet side or in worst case use a flow conditioner if it
must be placed on the outlet side.)
D
uc
t f
an
•
Note the ID-number of the FTMU. The ID is the three last
numbers of the serial number and can be found:
- on the label of the box it was delivered in
- on the label on the FTMU itself
- in the display after pressing the “MODE” button
- in the App when the product is turned on
Controller FTCU Ø125
Serial no. 132600052
Ultra
Link
Lindab
®
