DESCRIPTION
T1
value of external air temperature probe T1
T2
value of intake air temperature probe T2
T3
value of stale extracted air temperature
probe T3
T4
value of exhaust air temperature probe T4
RD1
Fan voltage
RD2
fan rpm
RD3
Air flow rate automatically controlled by fans (*)
RD4
Temperature report
RH
detected humidity value (*)
RHs
detected dynamic humidity set point value (*)
CO2
value of CO2 detected (*)
Preheating
resistance power output (*)
Cnt
Number of operating hours of the appliance
(fan hours rpm > 0)
DIP
Configuration dip switch power board
Time remaining until filter replacement
(in days)
This menu allows you to read some operating parameters
of the appliance.
With the controller “
ON
”, press “
M
” and On/Off
simultaneously for 3 seconds.
Select the “
rEAd
” menu using the TOUCH PAD and confirm
by pressing “
Enter
”.
Select the parameter to be read using the TOUCH PAD.
Once you have selected the parameter, the value will
appear on the display.
Press the“
M
” button once to return to parameter selection;
to exit the menu, press the “
M
” button 3 times.
* Available only if the functions feature air quality sensors
°C
T3
°C
T2
°C
T4
°C
T1
=
=
1234 5678
Dip n°
Lindab reserves the right to make changes without prior notice
202
2
-0
1
-
28
Installation instructions
RHR-CF
lindab | we simplify construction
19.
5
Read
menu
Fig. 7
7
Fig. 7
8
49
