Now proceed with connection of the differential
pressure switch to connections P3 and P4
6
P3 P4
P1
P2
“ V1 ” currently flashes on the control display;
use the
TOUCH PAD
to select fan “
V2
” and
confirm by pressing enter.
Carry out the procedure described above for V1 also
for fan V2.
When fan V2 has been set as well, go back to the
main screen by pressing “M”
3 times.
Disconnect the differential pressure gauge and put the
rubber caps and the cover of the front panel back in
place.
1
2
3
1. Use a screwdriver to remove the front panel cover.
6
P3 P4
P1
P2
2. Connect the differential pressure gauge to
connections P3 and P4.
Lindab reserves the right to make changes without prior notice
202
2
-0
1
-
28
lindab | we simplify construction
Installation instructions
Fig. 34
14.3 Right side configuration
RHR-CF
Fig. 35
Fig. 36
29
