4
l i n d a b | we s i m p l i f y c o n s t r u c t i o n
Tools you may require
• Drill
• Plugs
• Screws
• Square
• Spirit level
• Marker pen
• Tape measure
• Metal shears
• Nibbler
• Pliers
• Rubber hammer
Other
• Lindab duct system
• Lindab supply and exhaust air valves
Planning and measuring
1. Carefully plan where you intend to mount the duct system in the room.
2. Ideally starting in a corner and letting the rails and panels meet in the centre of the
straight sections.
3.Measure the room and determine how long all rails and panels should be. Remember
that the rail and panel joints should not end in the same place, so try to get them to over-
lap each other in order to create stability.
4. Try to minimise the number of joints on the panels.
