TROUBLESHOOTING YOUR POOLCLEANER
4
9
INSTALLING THE POOLCLEANER cont.
STEP 3 Attaching the PoolCleaner . . .
1. Connect the POOLCLEANER™ to the
grey cuff end on the leader hose.
STEP 5 Spa Fitting . . .
1. Connect the hose to the 90 degree
elbow or hose adaptor.
See chart below.
STEP 4 Getting your PoolCleaner wet . . .
With the pump turned off, lower the
POOLCLEANER™ and then vertically push
the hose down into the water until the
hose is completely filled with water.
YOU DO NOT WANT ANY AIR TO REMAIN
IN THE HOSE AND THE POOLCLEANER ™!!
Connect filter to between first and second
hose from skimmer box.
1
AIR
push
hose
down
ALWAYS TURN OFF THE SYSTEM BEFORE PERFORMING ANY REPAIRS.
ALWAYS REMOVE THE POOLCLEANER AND TURN OFF SYSTEM BEFORE
SWIMMERS ENTER THE POOL. REMEMBER SAFETY FIRST !!!
PROBLEM
SOLUTION
The PoolCleaner does not move.
The PoolCleaner moves too slow.
The right wheel will not turn when
rotated by hand.
The loops in the hoses won’t
come out.
The PoolCleaner does not clean
the entire pool.
The PoolCleaner climbs the wall
too much or climbs out.
The PoolCleaner won’t climb
the wall.
The hoses leak.
The pump may be turned off.
The pump may not be primed. Check for leaks in the
system (symptoms -- bubbles from the returns ?)
Problem or obstruction in the system.
Cart Needs cleaning.
Skimmer plugs installed correctly.
Pump impeller may be blocked (see pump manual).
Obstruction in the PoolCleaner itself. See pg 9 to clear.
Problem or obstruction in the system.
Obstruction in the PoolCleaner itself.
Low wheel RPM (insufficient flow). See pg 7 to adjust.
Obstruction in the PoolCleaner itself. See pg 9 to clear.
(see also “does not move” above)
(see also “moves too slow” above)
The hoses have been stored in a coiled position.
Lay them straight in the sunlight.
Clean swivel on cleaner head by running it under a tap.
The hose is too short. See pg 4. Step 2
The float(s) may be in the wrong position. See pg 4. Step 2
The Hose Cone Swivel (on the turbine cover) may be dirty.
Clean it.
The return fittings may be pushing the PoolCleaner
hoses away. Point them down. See pg 4. Step 1
The tire treads and skirts may be worn down.
Too much suction or flow. See pg 6 to adjust.
Too little suction or flow. See pg 7 to adjust.
Float may be in the wrong position. See pg 4. Step 2
An animal may have bitten into the hose.
The PoolCleaner falls on its side
and takes too long to recover.
The float(s) may be in the wrong position. See pg 4. Step 2
The hose is too short. See pg 4. Step 2
The return fittings may be pushing the PoolCleaner
hoses away. Point them down. See pg 4. Step 1
Brand
Model
Filters
Vacuum Fitting
Elbow/Hose Adaptor
Bullfrog
454
Top Load
Top Load Type
Elbow
251
Top Load
Top Load Type
Elbow
252
Top Load
Top Load Type
Elbow
254
Top Load
Top Load Type
Elbow
Cyclone
Swim
Top Load
Top Load Type
Elbow
Super Swim
Top Load
Top Load Type
Elbow
Designer X-Stream 126
Front Load
Front Load Type
Elbow
X-Stream 333
Front Load
Front Load Type
Hose Adaptor
X-Stream 659
Front Load
Front Load Type
Hose Adaptor
Signature V-Stream I
Front Load
Front Load Type
Elbow
V-Stream II
Front Load
Front Load Type
Hose Adaptor
V-Stream III
Front Load
Front Load Type
Hose Adaptor
Aquazone I
Top Load
Top Load Type
Elbow
Aquazone II
Top Load
Top Load Type
Elbow
Aquazone III
Top Load
Top Load Type
Elbow
W-Stream
Top Load
Top Load Type
Elbow
Leisurerite My Win Swim
Top Load
Front Load Type
Elbow
My Win Pro
Top Load
Front Load Type
Elbow
My Win Expert
Top Load
Front Load Type
Elbow
My Victory Swim
Top Load
Front Load Type
Elbow
My Victory Pro
Top Load
Front Load Type
Elbow
My Victory Expert
Top Load
Front Load Type
Elbow
