EXPLODED VIEWS
INSTALLING THE POOLCLEANER
STEP 1 Preparing your spa . . .
1. Make sure your chemical balance is
correct. If not, now is the time to
correct it. If you chemically shock
the spa,wait a day or two before
continuing.
2. Point all your return fittings downward.
STEP 2 Connecting the hoses . . .
1. Take the Leader Hose (the one with the grey cuff) and attach the
2 snap on floats, snap them at 50cm to 60cm from the grey cuff.
This is the section of hose that attaches to the POOLCLEANER
™
in Step 3.
10
3
POINT RETURN FITTINGS DOWN
The
PoolCleaner
1
2
3
4
5
7
8
9
10
11
2 WHEEL POOLCLEANER
6
LEADER HOSE
wall fitting
or
skimmer
One to two
lengths over
20-25" (50-60cm)
Grey Cuff
2 Snap On
Floats
2. Connect hose to
filter canister.
3. Connect all the hoses (except the Leader Hose).
Connect male to female. If need be, wet the
hoses for easier assembly. Now connect Leader
Hose to the end.
4. The connected hoses should be one to two
lengths longer than the furthest point from the
skimmer.
