2 01 6 M K Z
8
9
Climate
Control the temperature, airflow
direction, fan speed and other climate
features for you and your front
passenger through the touchscreen.
Set Your Temperature
Touch the lower-right, blue Climate
corner on the touchscreen.
Set your exact, desired temperature
by using the
+
or
–
buttons.
You can also use the voice controls
to adjust the temperature. Say
“Climate set temperature 72
degrees”
and MyLincoln Touch
makes the adjustment.
Entertainment
No matter how you store your
music, SYNC makes it yours to enjoy
when you are behind the wheel. Just
press the lower-left, red corner of the
touchscreen. From here, you can
easily go between AM, FM, SiriusXM*
and other media sources.
Set Your Radio Presets
Touch the Entertainment corner on
the touchscreen.
Touch
FM
.
Touch
Direct Tune
.
Enter the desired station
and touch
Enter
.
Touch
Presets
and then touch and
hold one of the memory preset
buttons to save it. The sound mutes
briefly and then returns once the
system saves the station.
Using SYNC to Access
Digital Media
SYNC has a media hub with multiple
inputs, allowing you to access
personal media from your digital
devices. Plug in your USB media
devices, such as phones and MP3
players, and use SYNC to play all of
your favorite music.
Note:
SYNC indexes your music; the
more stored information on your USB
device, the longer it takes SYNC to
index it.
Using Voice Commands
to Play Music
1. Plug your media player into your
USB port.
2. Press the voice button . When
prompted, say
“USB”
, then follow
up by saying a voice command.
For more information, refer to the
MyLincoln Touch
chapter of your
Owner’s Manual
. For support, visit the
website or call the toll-free number.
See the inside front cover of this guide
for details.
SYNC
®
with MyLincoln Touch
TM
Using Your Cell Phone with SYNC
Note:
Enter your phone book contacts
with both first and last names to
increase the ability of SYNC to select
the correct contact. Remember to say
the contact name exactly as you listed
it in your phone book.
Making a Phone Call
Use SYNC to make a phone call
to anyone in your phone book by
pressing the voice button. When
prompted, give a voice command.
For example, you could say
“Call
Jake Smith at home”
. SYNC repeats
the command back to you and dials
the number.
Note:
You can also make phone
calls by giving the voice command
“Dial”
, then verbally saying the
phone number.
Answering Incoming Calls
Whenever you have an incoming call,
the name and number of the person
calling appears in your display, if this
feature is available. Press
ACCEPT
on the touchscreen or the phone
button to answer an incoming call.
Ending the Call
Press and hold the phone button.
Do Not Disturb Mode
This feature blocks incoming calls
and text messages, and saves them
for later. You still have access to
outgoing calls when this feature
is active. Say the voice command
“Do not disturb on”
to enable, and
“Do not disturb off”
to disable.
Navigation
*
Press the upper-right, green
corner to access the available, voice
activated navigation system. It may
include many of these features:
SiriusXM Traffic
TM
*
SiriusXM Travel Link
TM
*
GPS (Global Positioning
System) technology
3-D mapping
Turn-by-turn navigation
Set a Destination
Set a destination on your touchscreen
by using a street address, city center,
a place on the map or a point of
interest (POI). The easiest way,
however, is by voice.
1. Press the voice button
. When
prompted, say
“Find an address”
.
2. The system asks you to say the
full address and then displays an
example on-screen.
3. You can then speak the address
naturally, such as:
“One two three
Main Street, Anytown”
.
You can also use the touchscreen to
enter a destination and narrow your
choices by city or street as you type.
You can choose from up to three
different types of routes:
Fastest:
Uses the fastest moving
roads possible.
Shortest:
Uses the shortest
distance possible.
Eco (EcoRoute):
Uses the most fuel
efficient route.
Tips
Save your favorite locations by
touching
“Save to Favorites”
.
Change your map views from
Heading-up, North-up or 3D.
*if equipped
*if equipped