3
CAR CARRIER LOADING:
:
Front T-Slot
Nylon Bridal with Short Nylon Strap Extension
Use the front two reinforced T-slots to load the vehicle onto a car carrier. The use of a
nylon bridle with a secondary nylon strap will assist in avoiding damage to the under
panel splash shields. Before loading, ensure that the transmission is in “Neutral”.
Securing the Vehicle for Transport
Note:
Wheel Straps should be used to secure the vehicle for transport. A secondary
method is securing by using the reinforced T-hook slots.
When the vehicle is in its loaded position on the flatbed with the bed still in the deployed
position, secure the vehicle to prevent it from rolling by chocking the wheels and
attaching one wheel strap or tie down to the wheel closest to you, then set the parking
brake.
Caution:
Do not overly tighten the tie downs or the vehicle may be damaged.
