10
Changing Batteries in the
Intelligent Access Transmitter
Note:
Replacing the battery will not delete the transmitter from the vehicle. The
transmitter should operate normally. The remote control uses one coin-type three-volt
lithium batteries CR2032 or equivalent.
1. Remove the key blade from the transmitter.
2. Twist a thin coin under the tab hidden behind the key blade head to remove the battery
cover. Do not use the key blade to remove the cover or you could damage it.
3.
Remove the old battery.
4.
Install new battery with the + facing downward. Press the battery down to make sure
it is fully in the housing.
5.
Reinstall the battery housing cover onto the transmitter and install the key blade.
