Press and hold VOICE briefly (on your steering wheel controls) until the
voice icon
appears on the Navigation display to use the Navigation
voice command. You will hear a beep, signaling that the system is ready
to take your command. Any command spoken prior to the beep will not
register with the system. Press RPT (repeat) to hear the previous
command repeated from the navigation system.
The voice activated command feature will not operate if a map DVD is
not inserted into the navigation DVD unit.
At any time, you may say these commands to change modes:
•
Radio
•
Audio on
•
AM
•
Audio off
•
FM1
•
Power off
•
FM2
•
CD Changer (if equipped)
•
CD
•
DVD (if equipped)
•
Power on
During normal radio operation, you may say:
•
Seek up
•
Seek down
During CDDJ or in-dash CD play, you may say:
•
Track up
•
Track down
•
Previous track
•
Disc up
•
Next disc
•
Disc down
•
Previous disc
To change the screen display, you may say the following commands:
•
Screen off
•
Screen day mode
•
Day mode on
•
Screen night mode
•
Night mode on
•
Screen auto mode
•
Auto mode on
Note:
If you say “Screen off”, you must touch the screen in order to
activate the screen again. The screen will not turn on again with a voice
command.
Commands that jump over screens:
•
Current position
•
Current location
•
Map
2004 Aviator f/k/a Navigator LS
(231)
Owners Guide (post-2002-fmt)
USA English
(fus)
Entertainment Systems
32