manualshive.com logo in svg

Lincoln 1999 Navigator, Owner'S Manual

The owner's manual for the 1999 Lincoln Navigator is available for free download on manualshive.com. This comprehensive manual provides all the necessary information and instructions for operating and maintaining your Lincoln Navigator, ensuring a smooth and hassle-free experience. Get your manual today and unlock the full potential of your Navigator.

Share
Download
background image

Disposal of air bags and air bag equipped vehicles

For disposal of air bags or air bag equipped vehicles, see your local
dealership or qualified technician. Air bags MUST BE disposed of by
qualified personnel.

SAFETY RESTRAINTS FOR CHILDREN

See the following sections for directions on how to properly use safety
restraints for children. Also see

Air Bag Supplemental Restraint

System (SRS)

in this chapter for special instructions about using air

bags.

Important child restraint precautions

You are required by law to use safety restraints for children in the U.S.
and Canada. If small children ride in your vehicle (generally children who
are four years old or younger and who weigh 18 kg [40 lbs] or less), you
must put them in safety seats made especially for children. Check your
local and state or provincial laws for specific requirements regarding the
safety of children in your vehicle.

Never let a passenger hold a child on his or her lap while the
vehicle is moving. The passenger cannot protect the child from

injury in a collision.

Always follow the instructions and warnings that come with any infant or
child restraint you might use.

When possible, place children in the rear seat of your vehicle. Accident
statistics suggest that children are safer when properly restrained in the
rear seating positions than in the front seating position.

Children and safety belts

If the child is the proper size, restrain the child in a safety seat.

Children who are too large for child safety seats (as specified by your
child safety seat manufacturer) should always wear safety belts.

Follow all the important safety restraint and air bag precautions that
apply to adult passengers in your vehicle.

If the shoulder belt portion of a combination lap and shoulder belt can be
positioned so it does not cross or rest in front of the child’s face or neck,
the child should wear the lap and shoulder belt. Moving the child closer to
the center of the vehicle may help provide a good shoulder belt fit.

Seating and safety restraints

97

Summary of Contents for 1999 Navigator


























































































































































































































Reviews:

No comments

Related manuals for 1999 Navigator

Valeo SC400 Operating Instructions Manual preview
SC400
Brand: Valeo Pages: 17
Hama Cup holder Operating Instruction preview
Cup holder
Brand: Hama Pages: 2
Abarth 124 SPIDER Service And Warranty Handbook preview
124 SPIDER
Brand: Abarth Pages: 36
JASTEC von-S2 Instruction Manual preview
von-S2
Brand: JASTEC Pages: 12
V8 equipment EBEX.2 Instruction Manual preview
EBEX.2
Brand: V8 equipment Pages: 17
Rugged Ridge 11232.20 Quick Start Manual preview
11232.20
Brand: Rugged Ridge Pages: 2
S&B Filters 75-5053 Installation Instructions preview
75-5053
Brand: S&B Filters Pages: 4
Mazda 2016 CX3 Service Information preview
2016 CX3
Brand: Mazda Pages: 3
Westin 32-1660 Instructions preview
32-1660
Brand: Westin Pages: 3
Istar PI00670 Instruction Manual preview
PI00670
Brand: Istar Pages: 6
Haltech PLATINUM HT051202 Quick Start Manual preview
PLATINUM HT051202
Brand: Haltech Pages: 10
Purpleline Nemesis Ultra FNU200 User Manual preview
Nemesis Ultra FNU200
Brand: Purpleline Pages: 4
Air Lift 75524 Installation Manual preview
75524
Brand: Air Lift Pages: 24
Honda 2011 Odyssey LX Reference Manual preview
2011 Odyssey LX
Brand: Honda Pages: 7
Crux SWRGM-51 Manual preview
SWRGM-51
Brand: Crux Pages: 5
Toyota PT427-48080 Installation Instructions Manual preview
PT427-48080
Brand: Toyota Pages: 6
Axxess AXAC-CH3 Installation Instructions Manual preview
AXAC-CH3
Brand: Axxess Pages: 8
Volkswagen 1999 Golf Diagnostic Manual preview
1999 Golf
Brand: Volkswagen Pages: 225

Brands by name

Popular brands

Load more brands