manualshive.com logo in svg

Lincoln 1999 Navigator, Owner'S Manual

The owner's manual for the 1999 Lincoln Navigator is available for free download on manualshive.com. This comprehensive manual provides all the necessary information and instructions for operating and maintaining your Lincoln Navigator, ensuring a smooth and hassle-free experience. Get your manual today and unlock the full potential of your Navigator.

Share
Download
background image

If the parking brake is fully released, but the brake warning lamp
remains illuminated, the brakes may not be working properly.

See your dealer or a qualified service technician.

Driving with a 4–speed automatic transmission

To account for customer driving habits and conditions, your automatic
transmission electronically controls the shift quality by using an adaptive
learning strategy. The adaptive learning strategy is maintained by power
from the battery. When the battery is disconnected or a new battery is
installed, the transmission must relearn its adaptive strategy. Optimal
shifting will resume within a few hundred kilometers (miles) of
operation.

If the shift quality does not improve within a few hundred
kilometers (miles) of operation, or if the downshifts and other
throttle conditions do not function normally, see your dealer or a
qualified service technician as soon as possible.

Your vehicle’s automatic transmission is also equipped with a special shift
strategy that insures maximum heater performance during cold weather
operation.

When ambient temperature is –5° C (23° F) or below and the engine
coolant temperature is below 38° C (100° F), light throttle upshifts may
be slightly delayed. Once the engine coolant temperature reaches 71° C
(160° F) the normal shift strategy will resume. This is normal operation
and will not affect the function or the durability of the transmission.

If the normal shift strategy does not resume once the engine
coolant temperature reaches the normal operating temperature,
or if the downshifts and other throttle conditions do not function
normally, see your dealer or a qualified service technician as soon
as possible.

Understanding gearshift positions

Pull the gearshift lever towards you and downward to move the
automatic gearshift.

Hold the brake pedal down while you move the gearshift lever
from P (Park) to another position. If you do not hold the brake

pedal down, your vehicle may move unexpectedly and injure someone.

Driving

116

Summary of Contents for 1999 Navigator


























































































































































































































Reviews:

No comments

Related manuals for 1999 Navigator

Menabo DELTA DL FIX 209FP Fitting Instructions Manual preview
DELTA DL FIX 209FP
Brand: Menabo Pages: 8
iOttie Aivo Connect Setup Manual preview
Aivo Connect
Brand: iOttie Pages: 58
cam 40103 AL Mounting Instructions preview
40103 AL
Brand: cam Pages: 6
newmotion Dynamic Power Management Home - Module Installation Instruction preview
Dynamic Power Management Home - Module
Brand: newmotion Pages: 20
Safe Fleet Prime Design OCM-3032 Quick Start Manual preview
Prime Design OCM-3032
Brand: Safe Fleet Pages: 4
Whispbar K481W Fitting Instructions Manual preview
K481W
Brand: Whispbar Pages: 14
Dodge CHALLENGER HELLCAT 2017 Owner'S Manual preview
CHALLENGER HELLCAT 2017
Brand: Dodge Pages: 484
Webasto HOLLANDIA 700 - 20 Series Service Manual preview
HOLLANDIA 700 - 20 Series
Brand: Webasto Pages: 30
Chevrolet LUMINA 1995 Owner'S Manual preview
LUMINA 1995
Brand: Chevrolet Pages: 324
Vauxhall MasterFit Manual preview
MasterFit
Brand: Vauxhall Pages: 4
Kargo Master 409CD Installation Manual preview
409CD
Brand: Kargo Master Pages: 7
Connects2 CTQIAU03 Installation & User Manual preview
CTQIAU03
Brand: Connects2 Pages: 2
Kia RIO 2005 General Information Manual preview
RIO 2005
Brand: Kia Pages: 25
BMW 316I Owner'S Handbook Manual preview
316I
Brand: BMW Pages: 177
Volvo FH 6X2 Specifications preview
FH 6X2
Brand: Volvo Pages: 3
Blue Ox BX2711 Installation Instructions Manual preview
BX2711
Brand: Blue Ox Pages: 8
PAC BCI-FD21 Instructions preview
BCI-FD21
Brand: PAC Pages: 4
RAM PROMASTER 2018 User Manual preview
PROMASTER 2018
Brand: RAM Pages: 196

Brands by name

Popular brands

Load more brands