Lincoln 1960 Series, Operator'S Manual

Page: 4 / 20

DTF – 1960 Series Operator Manual 4
EXTERIOR DIMENSIONS
UTILITY SPECIFICATION
Model # Input Rate Voltage Amps Phase HZ
1961 12 kW 208V 36 3 60
1962 12 kW 240V 32 3 60
1962-000-E 11.5kW 415/240V 34.5 3 50
1963-000-E 11.5kW 400/230V 36 3 50
1964-000-E 11.5kW 380/220V 37.5 3 50
1964 11.5kW 220V 37.5 3 50
REQUIRED CLEARANCE
The unit must have 6 inches (152 mm) of
clearance from combustible surfaces. In case
other equipment is located on the right side of
the unit, a minimum clearance of 24 inches
(610 mm) is required from that equipment.
FOR ALL UNITS: A 24-inch (610-mm)
clearance at the rear of the unit must be
obtainable for service access.
4” LEG
COMPONENTS
ANGLE PLUG – 50 AMP, 250 VAC, 3 PHASE
(Domestic units only)
(Wire & Plug not included with CE units)