Page 6
Weldanpower 230+
IMA 572F
GENERAL DESCRIPTION
Ordering
Welding
Auxiliary
Dimensions & Weight
Information
Description
Output
Power
(L x W x H
)
KA 1390
Multi-purpose
AC Constant Current
8000 Watts
1073 x 475 x 765mm
(Petrol)
Arc Welder with
230A/25V/100%
50/55Hz AC
Approx. 215 kg. (Petrol)
8,000 watts of
33 Amps @
KA1409-1
auxiliary power
DC Constant Current
240V
1260 x 490 x 767mm
(Diesel)
210A/25V/100%
Approx. 275 kg. (Diesel)
DC Constant Voltage
200A/20V/100%
Model
Description
Horsepower
Operating Speeds
Displacement
Capacities
Briggs &
2 Cylinder
13 kW
Full Load:
570cc
Fuel: 34L
Stratton
4 Cycle
@ 3300 RPM
3200 RPM
Lubricating Oil:1.7L
Air Cooled
Petrol Engine
High Idle
Aluminium Alloy with
3300 RPM
Cast Iron Liners,
Electrical Ignition
Low Idle:
2200 RPM
Weldanpower 230+
Engine - Petrol
The Weldanpower 230+ is a twin-cylinder, petrol or diesel driven, multi-process arc welder and AC power generator. It is built in a heavy
gauge steel case for durability on the job site.
SPECIFICATIONS
Model
Description
Horsepower
Operating Speeds
Displacement
Capacities
Ruggerini
2 Cylinder
13.3 kW
Full Load:
851cc
Fuel: 34 L
RD 211
4 Cycle
@ 3300 RPM
3200 RPM
Air Cooled Diesel with
Oil: 3 L
Direct Injection
High Idle:
Diecast Aluminium
3300 RPM
Crankcase
Low Idle:
2200 RPM
Engine - Diesel
DESIGN FEATURES
AC/DC Stick Welding
(Constant Current)
-
AC: 30 - 230 Amps
-
DC: 30 - 210 Amps
-
100% Duty Cycle on All Settings
-
Output Selector with 6 Ranges
-
Output Control for Fine Current Adjustment
-
Use with a broad range of AC & DC Electrodes Including
Fleetweld® 5P
DC Semi-automatic Wire Feed Welding
(Constant Voltage)
-
CV Tap Setting for 40-200 Amps.
-
100% Duty Cycle
-
Excellent Performance with 1.7mm NR®- 211-MP
Innershield® Electrode.
-
Limited MIG Welding with L-54 & L-56 Ultra using
blended Argon Shielding Gas.
-
The recommended Wire Feeder is the LN-25, but can also
be used with the LN-22 Wire Feeder.
AC/DC TIG Welding (Constant Current)
-
AC & DC TIG welding can be done at all constant current
output range settings.
Auxiliary Power
-
8000 Watt AC 240 Volt 50/55 Hz. Generator.
-
Operates AC Power Tools.
-
Powers Battery Chargers.
-
Powers a 1.5 kW Motor (If started under no load).
-
Lights eighty (80) 100 watt incandescent bulbs.
-
Can be used for stand-by power.
OTHER FEATURES
-
Bottom mounted 34 litre fuel tank with a convenient top
fill and fuel gauge.
-
Polarity switch for selecting DC+, DC-, or AC
welding output.
-
K930-2 high frequency kit available.
-
Remote control receptacle kit available.
-
Electronic engine idler. Engine automatically goes to low
idle 10 to 14 seconds after welding or use of auxiliary
power ceases. Includes high idle switch.