Lincoln Electric VIKING 3250D FGS, Operator'S Manual

Page: 13 / 56

Installing Aftermarket Side
Window Cover
Simply cover the Side Window with
Side Window Cover, make sure the
covers are line up with the lens.
Installing Aftermarket Magnifying
Lens
Simply slide the magnifying lens into
the short rail located on the sides of
ADF holder per Figure 13.
FIGURE 13
Installing Aftermarket Slotted
Hardhat Adapter
Remove the original headgear.
Reverse the hardhat headgear so
that the hardhat can be worn
backwards. Simply slide the
adapters into the slots located on the
side of the hardhat per Figure 14.
Adjust the distance between the
user’s face and lens by pressing the
button down and then sliding forward
or back. Adjust the tilt position by
loosing the tension knobs and then
rotating the lever forward or back.
FIGURE 14
Installing Aftermarket Non-Slotted
Hardhat Adapter
Remove the original headgear.
Reverse the hardhat headgear so
that the hardhat can be worn
backwards. Slide the hardhat
adapter with the spring at the back
Make sure the locks click on both
sides.Adjust the distance between
the user’s face and lens by pressing
the button down and then sliding
forward or back. Adjust the tilt
position by loosing the tension knobs
and then rotating the lever forward or
back.
11