Lincoln Electric Statiflex 800, Operator'S Manual

Page: 14 / 32

A-6
INSTALLATION STATIFLEX ® 800
9.06 i n .
(2 3 0 mm)
9
Recomme n ded
Recomme n ded
ft
(2.75 m)
8 .5 ft
(2.60 m)
11 in
15.5 in
FIGURE A.7 DUAL ARM SETUP - SF2400 EXTRACTION FANS
FAN REDUCER
NON RETURN
VALUE
HOSE
CLAMP
HOSE
3” OFFSET
FROM THE
CENTER
70” - 75” MAX***
Note - *** This is the recommended maximum distance (both sides) using the flexible hose
(
Dia 8”) provided with the unit. Minimum distance is based on the space availability
at install, cut the hose to the required length on both sides. Maximum distance can
be increased if hard ducting is used – contact Lincoln Electric for more details.
ATTENTION
The SF 2400 which is mounted right of the
Statiflex 800 filter unit will be in reverse
position, resulting in center points of fan
outlet and filter inlet not aligning. This will
not affect system performance.
9
Recomme n ded
Recomme n ded
ft
(2.75 m)
8 .5 ft
(2.60 m)
11 in
15.5 in
FIGURE A.8 DUAL ARM SETUP - SF4200 EXTRACTION FANS
FAN
COUPLING
NON RETURN
VALUE
HOSE
CLAMP
HOSE
3” OFFSET
FROM THE
CENTER
50” - 55” MAX***
Note - *** This is the recommended maximum distance (both sides) using the flexible hose
(
Dia 8”) provided with the unit. Minimum distance is based on the space availability
at install, cut the hose to the required length on both sides. Maximum distance can
be increased if hard ducting is used – contact Lincoln Electric for more details.
ATTENTION
The SF 4200 which is mounted right of the
Statiflex 800 filter unit will be in reverse
position, resulting in center points of fan
outlet and filter inlet not aligning. This will
not affect system performance.
Mounting screw horizontal
center to center distance
Mounting screw vertical
center to center distance
Mounting screw horizontal
center to center distance
Mounting screw vertical
center to center distance