A-11
INSTALLATION
WORKING LIGHT
The working light consists of:
• Lighting fixture with 7.5 ft (2.3 m) of cable and plug
• 6 Bolts M6
• 3 Tie-wraps
To mount the working light, proceed as follows.
1. Mount the lighting fixture using the 6 bolts (A). See Figure
A.17.
2. Route the cable down the back side of the downdraft table.
3. Attach the cable to the back panel using the 3 cable tie mounts
and cable ties (B). See Figure A.17
4. Connect the cable. See Figure A.18, item B.
FIGURE A.17 – WORKING LIGHT
FIGURE A.18 – CONNECTIONS
A (x6)
B (x3)
A
B
C
PRISM
®
DOWN DRAFT
& PRISM
®
DOWN DRAFT WITH MECHANIZED CLEANING
