8695 4598 / G
C - DESCRIPTION OF ASSEMBLING IN PLASMA CUTTING PROCESS
CPM 400-450-600wi
C-51
Put in place the downstream nozzle (M65) (according to the cutting table) in the water vortex kit (M63).
The seal need not be lubricated.
Screw the nut (M66) that holds the downstream nozzle (M65) on the water vortex kit (M63). The seal
need not be lubricated.
Place the tip under the connector and push the tip till you can feel the stiffness of the shutters. Screw
the tip nut.
Check the tightening of the cap (M64).
Check the tightening of the nut (M66) that holds the downstream nozzle (M65).
The
CPM 600
wi
torch is ready for use.
Removing the consumables :
Reverse the assembly order. Special equipment is required for removing the torch.
Nozzle and diffuser
