9
ACCESSORIES
OPTIONAL KITS AND
ACCESSORIES
50 Foot Extension Cable
- A 50 foot cable extension that comes
with a power cable, gas line, and control cable. Installation of a
quick connect fitting will be required to use this. Instructions will
be provided with the extension kit.
Order K3673-50
.025" / .035" Steel Drive Roll
- Features two grooves for feeding
steel wire. The smaller groove feeds .025" wire. The larger groove
feeds .035" wire.
Order KP2518-1
For smaller steel wire diameters and front end expendables:
350 Thread-On Diffuser
Order KP2746-1
350 Thread-On Nozzle
Order KP2742-1-62R
350A Insulator
Order KP2773-2
45/60 Degree Barrel Liner
Order KP2879-1
180 Degree Barrel Liner
Order KP2879-2
Contact tips:
.025" Steel
Order KP2744-025
.030" Steel
Order KP2744-030
.035" Steel
Order KP2744-035
.030" Aluminum
Order KP2744-030A
.035" Aluminum
Order KP2744-035AT
3/64" Aluminum (4XXX Series)
Order KP2744-364AT
3/64" Aluminum (5XXX Series)
Order KP2744-364AT5356
.030” - .035” / 3/64” Aluminum Drive Roll -
Features two
grooves for feeding aluminum wire. The smaller groove feeds
.030” to .035” wire. The larger groove feeds 3/64” wire.
Barrel Liners -
550A Front expendable liners for feeding up to
3/64” wire.
180 Degree Barrel Liner
Order KP2879-5
45/60 Degree Barrel Liner
Order KP2879-4
Gas Diffuser -
550A Diffuser designed to accept thread on gas
nozzles
Order KP2747-1A
Gas Nozzle
- .625" Thread on 550A Nozzle (Tip Recessed)
Order KP2743-1-62RA
Insulator
- For 550 Amp front end expendables.
Order KP2773-1
Contact Tips -
Both standard duty and heavy duty contact tips are
available in a variety of sizes:
.035” steel
Order KP2745-035
.030” Aluminum
Order KP2745-030A
.035” Aluminum
Order KP2745-035AT
3/64" Aluminum
Order KP2745-364AT
3/64" Aluminum (5XXX series)
Order KP2745-364AT5356
MAINTENANCE
ELECTRIC SHOCK can kill.
•
Turn the input power OFF at the welding
power source before installation or
changing drive rolls and/or guides.
•
Do not touch electrically live parts.
•
When inching with the gun trigger, electrode and drive
mechanism are "hot" to work and ground and could
remain energized several seconds after the gun trigger
is released.
•
Do not operate with covers, panels or guards removed
or open.
•
Only qualified personnel should perform maintenance
work.
ROUTINE MAINTENANCE
Periodically blow out or vacuum any metal wire shavings from
Drive Roll area.
Inspect and replace any worn wire on inlet guide or barrel liner.
NOTE: Oil and spray cleaners can contaminate electrode wire and
cause bad welds. They could also make wire drive rollers slip. Be
careful when using any of these liquids on spool gun.
Carefully clean gun with a cleaner that is safe for plastic. Apply
cleaner to rag and wipe gun. Do NOT spray cleaner on gun. Keep
cable dean. Oil, grease gasoline, paint, and solvents degrade cable
insulation.
Routine maintenance for consumable spare parts will depend
on Duty Cycle and particular application.
WARNING
MAGNUM PRO 250 LX & LX GT SPOOL GUN
