Lincoln Electric FLEXCUT 125 CE, Safety Instruction For Use And Maintenance

Page: 11 / 44

8695 4496 / B
FLEXCUT 125 CE INSTALLATION
C-7
C - DESCRIPTION
1 - CAPACITIES OF THE FLEXCUT 125 CE INSTALLATION
This complete installation consists of a group of industrial equipment (power source, torch, control unit, tool
holder, bundles...) especially designed to allow automatic thermal cutting by plasma jet.
Thermal cutting using plasma jet is a cutting process by fusion and ejection of the molten metal by the
plasmagene gas.
The installation is designed for cutting from 45A to 125A up to 30mm at middle sheet cutting start (40mm at
sheet edge cutting start), mainly with steel, stainless steel or aluminium, using the following gases: air, nitrogen and
argon-hydrogen. The installation can also do plasma markin from 12A up to 16A.
NOTE : The speed/quality ratio can be chosen according to the final use of the parts cut out.