GENERAL DESCRIPTION
The Air Vantage
®
source. The machine uses a brush type alternating current
generator for DC multi-purpose welding, for 120/240 VAC single
phase and 240 VAC three phase auxiliary standby power. The
welding control system uses state of the art Chopper
Technology
®
. The machine also integrates a belt-driven 60 CFM
The machine has been equipped with CrossLinc
®
Technology to
provide weld cable communication for voltage control at the arc
without the need for a control cable.
TECHNICAL SPECIFICATIONS
(1) Output rating in watts is equivalent to volt-amperes at unity power factor.
Output voltage is /- 10% at all loads up to rated capacity. When weld-
ing, available auxiliary power will be reduced.
(2) Top of Enclosure. Add 16.1" (409 mm) for exhaust and air cleaner.
(3) Includes Door. Base is 31.6” (803 mm) wide.
(4) Approximate weight less fuel.
INPUT - DIESEL ENGINE
Make /Model
Description
(K4394-2)
Deutz
®
TD2.9L4
EPA Tier 4i
4 Cylinder 65.7 HP (49 kW)
Turbocharged Water Cooled
Diesel Engine
Speed (RPM)
Displacement
High Idle 1800
Low Idle 1525
Full Load
178 cu. in. (2.9L)
Bore x Stroke
3.62” x 4.33”
92mm x 110mm
Starting System
Capacities
12 VDC Battery and Starter
with Automatic Glow Plugs
Fuel: 25 US gal. (94.6L)
Oil: 2.25 US gal. (8.5L)
Cooling System: 2.5 US gal.
(9.5L)
Battery Size
BCI Group Size 34
800 Cold Crank Amps
RATED OUTPUT @ 104°F(40°C) - WELDER
Duty Cycle
Welding Output
Volts at Rated Amps
100%
575 Amps
(DC multi-purpose)
43 Volts
60%
600 Amps
(DC multi-purpose)
40 Volts
OUTPUT @ 104°F(40°C) - WELD ER AND GENERATOR
Welding Mode
Output Range
CC-Stick
30-600 Amps
Downhill Pipe (CC)
40-350 Amps
Touch Start TIG
20-350 Amps
CV-Wire
10-45 Volts
Arc Gouging
60-600 Amps
Open Circuit Voltage
60V Avg @ 1800 RPM
Auxiliary Power
(1)
120/240 VAC
7,800 Watts, 60 Hz., Single Phase
20,000 Watts, 60 Hz., Three Phase
RECEPTACLES
Receptacle
Circuit Breaker
120 VAC Duplex (5-20R) GFCI Protected
20 Amps
240 VAC Three Phase (15-50R)
50 Amps
120 VAC IEC 60309 Yellow 2P+Ground
15 Amps
PHYSICAL DIMENSIONS
Height
(2)
42.0 in. (1066.8 mm)
Width
(3)
32.9 in. (835.7 mm)
Depth
69.0 in. (1753 mm)
Weight
(4)
1737 lbs. (787 kg)
A-1
INSTALLATION
AIR VANTAGE
®
600X-I
600X-I is a diesel engine-driven welding power
rotary screw compressor.
Compressor Model
Description
Maximum System
Pressure
Compressor Protection
Capacities
COMPRESSOR SPECIFICATIONS
High Idle:
60 cfm @ 100 psi
(1.7 cmm @ 6.9 bar)
Belt-Drive Rotary
Screw
VMAC® S700162
Safety Relief Valve:
200 psi (13.8 bar)
High Temperature
Automatic Shutdown:
290°F (143°C)
1.1 US gal. (4.0L)
70V Peak @ 1800 RPM
240 VAC IEC 60309 Blue 2P+Ground
15 Amps
IEC 60974-1; IP23 Rated
