B-
5
OPERATION
FAN RUNNING:
Fan running when alarm active with RED background.
The above screen appears during Fan running to indicate
following:
FanRunningManual: this to indicate fan is running in manual
mode. In auto mode FanRunning Auto will be displayed.
FiltrPr: Filter differential pressure in Pascal, measured across
filter.
DuctPr: Duct pressure in Pascal
FanSpeed: Fan running speed in % of full speed
SetSpeed: Using selector the airflow levels can be set to Low,
Medium and High.
SetFltPr- Set filter pressure, is limit for differential pressure
across filter, if exceed above this set limit will trigger cleaning
cycle
FAN RUNNING:
The above screen appears during Fan running to indicate
following:
FanRunningManual: this to indicate fan is running in manual
mode. In auto mode FanRunning Auto will be displayed.
FiltrPr: Filter differential pressure in Pascal, measured across
filter.
DuctPr: Duct pressure in Pascal.
FanSpeed: Fan running speed in % of full speed.
SetSpeed: Using selector the airflow levels can be set to Low,
Medium and High.
SetFltPr- Set filter pressure, is limit for differential pressure
across filter, if exceed above this set limit will trigger cleaning
cycle.
Alarm:
Fan running when alarm active with RED background.
Online cleaning
PulseTm: Indicates solenoid on time.
Pause Tm: Time delay between two cleaning pulses.
CleanCy#: Number of cleaning cycles
Pulse#: elapsed number of pulse and total number of cycles.
PRISM
®
CIRCULATOR 4000
®
