5
LINCE ITALIA S.p.A.
1.4 SPECIFICATIONS
Power supply
12Vdc
Total wireless devices
up to 32 (detector, remotes, ecc)
Power
consumption
80 mA
NC relay zone outputs
up to 32
Transmission
frequencies
869,40 MHz-869,65 MHz 1 canale, 868,00 MHz-
868,60 MHz 4 canali
NC area 24 h
1
FH
Frequency Hopping
Outputs controlable by
remotes
4
TDMA
Time Division Multiple Access
Dimensions
170 x 107 x 30 mm
AES
Advanced Encryption Standard
Working temperature
5°C ÷ 40°C
Range
up to 1.5 km in free air (the range depends on the type
and the combined device)
Color
White
Table 2
Part
Description
A
Wall fixing holes
B
Hot-Spot reset button for the Wi-Fi module
C
Wi-Fi module status LED, emits only one type of
flashing to indicate correct module operation
D
Tear plate fixing hole
E
Anti-removal and anti-opening tamper
F
Terminal block for tamper connection
G
Expansions connector
H
Device status LEDs
I
Input/output terminal block
L
Multifunction button
M
Devices supervision status signaling LED
N
Devices supervision status signaling LED
O
Devices tamper and antimasking signalling LED
P
Pre-cut for cable passage
1.5 INTERNAL PARTS DESCRIPTION
12V 1 2 3 4 5 6 7 8
01 02 03 04 +OFF I1 I2
AL BA S AS AS
TP
A
B
C
D
M
F
L
E
G
H
I
Fig. 2
A
O
I
N
Table 3
TERMINAL
BLOCK
DESCRIPTION
TERMINAL
BLOCK
DESCRIPTION
12 V
Power supply
+OFF
System status input activable due to arrival or
lack of negative. If the control panel to which it
is connected does not have a compatible output,
connect the 12 V terminal
Reference mass, negative power supply (all the
masses are common)
I1, I2
Pilot inputs of the associated wireless outputs.
Programmable as arrival or lack of positive
1
÷
8
NC relè output
AL
Output activable due to lack or arrival of positive
to sound any stored sirens
Reference mass, negative power supply (all the
masses are common)
BA
Open collector negative output present with the
device battery discharged.
01
÷
04
Open collector output for remote control
S
Open collector negative output present in case of
smonitoring signal
Reference mass, negative power supply (all the
masses are common)
AS
Connect a 24h tamper line from the control panel
to these two terminals
1.5.1 Terminal block description
P
P
P
