Lincat Silverlink 600 DC04, User, Installation And Servicing Instructions

Page: 15 / 20

IS355 ECN3592
15

Replace in reverse order, ensuring correct phial location within the tank bracket.
Control Valve (Fig 5, 2)

Removal of the hobtop and facia as per (Fig, 5) .

Disconnect all wires connections on valve terminals.

Undo pilot feed pipe.

Undo supply pipe and burner pip unions.

Remove screws from each side of valve support brackets.

Withdraw valve.

Replace in reverse order.

Reset burner pressure as per “Installation instructions”
Separating Pilot assembly (Fig 6)
1. Remove the two screws under the base that hold the burner bracket onto which the
pilot assembly is mounted.
2. Remove screws to separate burner from pilot assembly.
3. Undo pilot gas feed pipe from pilot assembly (Fig 6,A) .
4. The pilot assembly can now be accessed replace in reverse order.