IS707 ECN 4277
4
Hob zone power (kW)
6 x 1.85
6 x 1.85
Max combined weight of
pans on hobtop (kG)
50
50
Oven power (kW)
6.0
4.0
Total power (kW)
17.1
13.0
PHER01/SPH WIRING
This unit is designed so it can be wired either with a single 63A plug and lead or two 32A
plug and leads. As supplied the unit is wired for a single 63A supply.
To wire it with two supplies, fit the extra cable gland supplied into the base. On the clear
mains terminal block remove the 4mm
2
brown and blue cables linking the top and
bottom live and neutral connections, discard these two cables. Connect the two supply
cables, one to the top of the connector and one to the bottom connector. Do not
crosslink the lives or neutrals.
CHECK LIST OF ENCLOSURES
Warranty card
Instruction manual
INSTALLATION AND COMMISSIONING
This appliance must be earthed.
An equipotential bonding terminal is provided to allow cross bonding with other
equipment.
If replacing the plug connect the terminals as follows:
Green and Yellow wire Earth E
Blue wire Neutral N
Brown wire Live L1
Black wire Live L2
Grey wire Live L3
Means of isolation with at least 3mm contact separation in all poles must be
incorporated into the fixed wiring of this appliance.
The fixed wiring insulation must be protected by insulated sleeving having a
temperature rating of at least 60
o
C.
Supply cords shall be oil resistant, sheathed flexible cable not lighter than
ordinary polychloroprene or equivalent elastomer sheathed cord (code 60245 IEC
57)
