IS707 ECN 4277
4
CHECK LIST OF ENCLOSURES
Warranty card
Instructions manual
INSTALLATION AND COMMISSIONING
This appliance must be earthed.
If replacing the plug connect the terminals as follows:
Green and Yellow wire Earth E
Blue wire Neutral N
Brown wire Live L
Supply cords shall be oil resistant, sheathed flexible cable not lighter than ordinary
polychloroprene or equivalent elastomer sheathed cord (code 60245 IEC 57)
Install this appliance on a level surface ensuring all vents are unobstructed. Anyny
adjacent partitions, walls or furniture must be of non-combustible material. To avoid
heat damage to the induction module do not place this appliance next to hot
appliances such as ranges and griddles without following the minimum distances
stated. A 100mm B 1000mm
– see Fig 1. Any heat damage through not following
the siting instructions will void the warranty of this appliance.
Fig 1