IS 592 ECN 3855
Page 5 of 13
Fig 1
Gas supply is at the rear of the appliance.
The appliance is type ‘A’. Rooms must be ventilated in compliance with existing
technical regulations. The airflow must not be less than 2 cubic metres per hour per
kW of installed capacity.
If the appliance must be fitted near walls, partitions kitchen furniture etc we
recommend they are made from non-inflammable material, otherwise they should
be covered with a suitable heat-resistant material. Full attention must be paid to fire
prevention regulations.
If the supply pressure exceeds 37mbar for 3rd family gases then an external
regulator must be fitted at the appliance inlet.
