background image

IMPORTANT:  DO NOT DISCARD THIS MANUAL 

This manual is considered to be part of the appliance and is to be given to the OWNER or 

MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of 

this appliance.  Additional manuals are available from your WELLS DEALER. 

 

THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR 

INSTALLING THIS APPLIANCE.

  Contact your WELLS DEALER if you have any 

questions concerning installation, operation or maintenance of this equipment. 

OPERATION MANUAL 

 

HEAVY DUTY 

GAS GRIDDLE 

 

MODELS 

 

HDG-2430G 
HDG-3630G 
HDG-4830G

 

 

Includes 

INSTALLATION 

USE & CARE 

122 

p/n 

306626

 

Rev. 

(-) 

 

ECN-12914 

              M122 

 

 

05

1205  cps 

PRINTED IN CHINA 

FOR YOUR SAFETY

 

Do not store gasoline or other flammable liquids 

in the vicinity of this or any other appliance. 

WARNING: 

Improper installation, adjustment, alteration, service or maintenance can cause 
property damage, injury or death.  Read the installation, operating and mainte-
nance instructions thoroughly before installing or servicing this equipment. 

IMPORTANT: 

The purchaser of this equipment must post in a prominent location instructions to be followed in the 
event the user smells gas.  This information shall be obtained by consulting the local gas supplier. 

Model HDG-3630G 

Summary of Contents for HDG-2430G

















Reviews: