IS 607 ECN 4345
Page 8 of 12
dry. Cover with new or cleaned Teflon sheet. Do not use a scraper or abrasive
cleaners on the aluminium plate.
SERVICING, MAINTENANCE AND
COMPONENT REPLACEMENT
All servicing, maintenance and component replacement on this appliance should be
carried out by one of our recommended service engineers.
Neon replacement
Remove the screws beneath the facia panel, and remove the facia panel by rotating
the bottom forward.
Remove the cables from the neon. Unscrew the neon retaining nut to remove the
neon.
Reverse the sequence to fit new neon and reassemble.
Note: Remove top cover of clam when replacing clam neon, and follow sequence
as above.
Thermostat replacement
On the griddle plate:
Remove the screws beneath the facia panel, and remove the facia panel by rotating
the bottom forward.
Remove the control knob and undo the screws that hold the thermostat. Remove
the cables from the thermostat, noting their location.
Remove the screws that hold the bulb bracket and withdraw from the element
cartridge. Discard the failed thermostat.
Reverse the procedure to fit the new thermostat, ensuring that the capillary is
formed at a radius of at least 4mm and is free of kinks.
On the clam plate:
Remove the top panel of the clam top and disconnect the cables from the
thermostat, noting their location.
Remove the cover plate and release the rubber grommet from inside the head to
allow access to the stat bracket fixing screws.
