Lincat OG7001, User, Installation, Servicing And Conversion Instructions

Page: 9 / 15

IS431 ECN3592
9
U
T
W
V
S
R
P
O
Oven Burner injector

Remove the oven base tray and shelves.

Disconnect the ignition lead and remove thermocouple T by undoing lock nut V.

Undo the flexi hose from the coupling O and remove coupling O from burner.

Remove the injector, fibre washer W and copper washer X.

Replace the injector applicable to the required gas type including the new washers supplied.

Re-fit all components in reverse
order.
Oven Burner

Remove the oven base tray and shelves.

Disconnect the ignition lead and remove thermocouple T by undoing lock nut V.

Undo the flexi hose from the coupling O and remove coupling O from burner.

Undo 4 fixing screws and remove burner.

Re-fit all components in reverse order.
Completion of Conversion

Remove the redundant data plate and gas type identification label and attach new
replacements corresponding to new gas type.

Test all previously dismantled joints for soundness.

Functionally operate the appliance to the new operating pressure as detailed in page 7.
Oven Burner Components
Part Description
O Coupling
P Fibre washer
R Copper washer
S Injector
T Thermocouple
U Burner body
V Thermocouple nuts
W Ignitor electrode