Lincat D3H, Installation, Operating And Servicing Instructions

Page: 7 / 8

IS 282 ECN 3607 Page 7 of 8
Remove the rear doors, shelves and base plates. Brush crumbs into the tray Fig 3
C. Shelves and supports may be washed in a dishwasher.
Clean all panels with warm water and mild detergent, do not use abrasive materials.
Dry with a soft cloth.
SERVICING, MAINTENANCE AND
COMPONENT REPLACEMENT
Replacing a light tube
Disconnect the appliance from the supply. Allow tube to cool. Use the Allen key
provided to remove the end caps from the light unit. Remove the diffuser from the
clips. Rotate the tube 90
0
and pull down until released. Replace the starter if
necessary by rotating anticlockwise and removing. Fit the new tube by reversal of
the above sequence.
All other servicing, maintenance and component replacement on this appliance
should be carried out by one of our recommended service engineers.
Please refer to the Service Help Desk number on the final page of this manual.
Part Number Description Used on
BU171 Light tube All
EL218 Element D3
EL162 (75 models) Element
D5 C6
EL161 (100 models) Element
GL68 Starter All
HP17 (75 models) Base plate C6
HP18 (100 models) Base plate C6
HP19 (100 models) Base plate D5
HP20 (75 models) Base plate D5
HP21 Base plate D3
KN203 Control knob D3 D5
SH93 Shelf D3
SH91(75 models) Shelf D5
SH92 (100 models) Shelf D5
SH97 (75 models) Shelf C6
SH98 (100 models) Shelf C6
S/M0085 Self service door knob D5 C6
FAULT FINDING
SPARE PARTS LIST