IS 282 ECN 3607
Page 5 of 8
OPERATING INSTRUCTIONS
Only qualified or trained personnel should use this appliance.
This appliance relies on the circulation of warm air passing through and around the
shelves. Ensure circulation is not obstruct by overloading product or by using
aluminium foil.
This appliance is intended for displaying pre-heated food
– not for heating
food.
Fig 2
Identification (Fig 2)
1. Cable 2. On/Off switch 3. Light switch 4. Temperature controller 5. Crumb tray
/ Water bath
Ensure the base plates lie flat within the base and the shelves are secure. Close all
doors
– front and rear. Connect to the electricity supply, switch on the light (3) then
switch on the ‘On/Off’ switch (2). C6 appliances are factory set to 85 Deg C. Press
and hold the ‘Set’ button to confirm this.
