Lincar Siria 840, Using Instructions And Maintenance

Page: 69 / 120

IT-GB-FR
mod. 740-740 ECO-740/SA-740/SA ECO-740N/SA
69/120
M-2-4-02
START 1 WEEK-END Insert 1 starting hour 07:00 00:00-off
M-2-4-03
STOP 1 WEEK-END Insert 1 extinction hour 12:00 00:00-off
M-2-4-04
START 2 WEEK-END Insert 2 starting hour 14:00 00:00-off
M-2-4-05
STOP 2 WEEK-END Insert 2 extinction hour off 00:00-off
The program hours will be repeated every day of the week in the same way. For a correct
execution of the programs, set very carefully the data of Menu 01.
Selecting oFF instead of the starting or extinction hour, the appliance exclude the automatic
starting or extinction
Menu 03 SELECT LANGUAGE - (setting up the language of the control panel).
Display Description Example
SELECT
LANGUAGE
Set up the language of the control panel ENGLISH
Available languages : ITALIAN, ENGLISH, DEUTSCH, FRANCAIS
Menu 04 STATUS STAND-BY - (Set up way of appliance extinction according to the room
and boiler temperatures).
Display Description Example
STATUS STAND-BY Activate(on) / Deactivate(off) the stop modality if the set room or
boiler temperatures have been exceeded .
oFF
Available selections : on, oFF
ON, If the appliance is exceeding 2°C the set value of room or boiler temperature, it starts the
extinction cycle.
OFF, If the appliance is exceeding the set value of room or boiler temperature, it will continue to work
at min. power, without extinctinguishing.
Menu 05 STATUS BUZZER - (Setting up of buzzer sound).
Display Description Example
STATUS BUZZER Select the buzzer modality you wish ONLY ALARM
Available selections: OFF, ONLY ALARMS, ALWAYS ON
OFF – Always off ONLY ALARMS – Sounds only if an alarm has occurred.
ON ALWAYS, sound in case of alarm and at any tuch of the buttons of the control panel.
Menu 06 LOAD INITIAL - (Continuos fuel load setting).
Display Description Example
LOAD INITIAL Activates the continuos load of fuel
this operation can only be effected when the appliance on the display is evidencing “OFF”. This menu is
utilized to fill the screw feeder when the appliance is new or in case of emptying of the pellet container.
Menu 07 STATUS STOVE - (Displays the status of the appliance).
Display Description Example
STATUS STOVE Shows informations about the working of the appliance
Displayed values:
Fume temperature, fume expeller motor rev/min, appliance status, room temperature, boiler pressure,
time of fuel loading, and a screening of informations for TECHNICIANS.
Menu 08 PELLET CORRECT - (Correction of appliance combustion).
Display Description Example
PELLET CORRECT Combustion modification
ACCESS KEY Insert access key to accede to the combustion modification 33
PELLET CORRCT Correction of the load of fuel -02