mod. G02
17/72
1
INSTALLATION
RESERVED TO INSTALLER
1.1
Normative and prescriptions
•
Read carefully the contents of this handbook, it contains important information and
instructions for installation, use, maintenance and product safety.
This handbook must be
ridden and study in all parts, otherwise it will be consider as “ Improper Use “ and a not
correct employ of the Lincar equipment.
•
The appliance must be installed inside an environment considered suitable for
installation and use by competent authorities. All laws, standards and regulations in force
on the installation site must be observed, especially regarding fire prevention.
•
Technological connection and appliance installation must be carried out by qualify staff
authorized to release a conformity certificate according with the normative in force and
current standards.
•
All the normative concerning civil town planning and/or industrial in force must be
respected inside environment installation of appliance.
•
All laws, standards and regulations in force on the installation site must be observed,
regarding: gas and flues, electricity, water and steam, drains and waste disposal, forced
ventilation/extraction, air intake and air conditioning. All the local and energy supplier
authorities’s prescriptions must be respected.
•
The installation must be carried out and certified according to the normative in force
regarding: work safety and accident prevention regulations, hygiene and health, fire
prevention, no-panic safety for activities open to public.
•
The manufacturer disclaims all responsibility caused by a no correct installation,
using or tampering.
1.2
Preliminary operations
•
Make sure that the appliance is supplied complete and it has not been damaged during
transport. In case of doubt, do not use it and call the dealer.
•
Before appliance connection, check the technical data plate (a duplicate is reported on
pag. 21/72) to make sure that the appliance has been tested for the type of gas with which
it is to be operated; on the contrary proceed with the transformation operations according
to the new gas type following the instructions reported on chapter 1.7 on this handbook.
•
Remove protective films and adhesive labels. Immediately eliminate all traces of
adhesive with petrol. Do not use aggressive solvents to clean plastic parts.
•
To install the appliance horizontally, correct position is obtained by turning the levelling
feet.
•
The ½ module appliance installed in standalone configuration, must be fastened to other
appliance (employ the holes on appliance side and ask for fixing kit) or to the floor (ask
for the foot flange) to avoid possible overturning.
•
A shut-off valve (of a type clearly showing the OPEN and CLOSED positions) must
always be installed upstream of the appliance in an easily accessible position. Do not use
types with removable keys.
•
A fitting allowing pipe union for the appliance disconnection must be installed
downstream of the shut-off valve.
Summary of Contents for G0230
Page 71: ...mod G02 71 72 NOTE...
Page 72: ...mod G02 72 72 NOTE...
