Page 16 of 20
3) Before mounting, both mounting brackets must be pulled out to their outer position by pushing them
back. This gives freedom of movement to the bed bracket. Mounting is done by pushing the bed bracket
into the TD1 unit and thereafter pushing the mounting brackets back again.
Example for correct welded twist bracket to the
bedframe.
It is very important that the axle distance is kept.
2) To maintain the correct angle of rotation of the headrest and the footrest it is important that the
twist bracket is welded according to the above instructions. Non-compliance with the instructions
could lead to a smaller angle of rotation or in a worst case damage to TD1.
