Page 30 of 44
Screen nr. 5: ”Service counters”
The service counter tab is divided into 4 areas:
• Start/Stop data where it is possible to see the total running time, number of actuator starts and
stops and the reasons.
• Temperatures, here it is possible to read the relevant temperatures measured on the FET
transistors and the processor.
• In the current section it is possible to see the performed work, current cut-offs etc.
• In the voltage section the number of power fails and the reason for power down.
• In the communication section you can read if there has been any communication problems.
• For better traceability in an service situation a unique device ID can be utilised as reference
The service counters are not reset-able and will be valid during all actuator life-time.
