8
Controls
Speed:
Soft Stop:
Soft Start:
The speed percentage can be adjusted as a motor voltage percentage. The lowest recommended speed is
60% to ensure that the actuator will push the rated load.
With a soft stop, you select a time-frame for the actuator to slow down to zero after the stop signal is applied.
The time can be set between 0 (hard stop) and 30 sec, with the exception of: 0.1-299 ms. The reason for this, is
that the actuator is unable to redirect/consume the accumulated energy in a 0.1-299 ms stop.
The soft start is similar in function to the soft stop, but can be fully configured between 0-30 sec.
