Lin Engineering
Page 11
5/16/2016
Silverpak 17C-CE User Manual
Rev 1.11
RS232-485 converter card
(Figure 4)
1.
The RS232 converter card connects to the Silverpak using the DB-9 cable that
is provided to you. Opposite the DB-9 cable is a 3-Pin connector which is
placed onto the converter card.
2.
Your power supply will be connected to the RS232 card where the green
header is located. The “
+
” is for
+12 to +40VDC.
The “
-
“ is for the
Power
Supply Ground. The Silverpak must also be powered via Pin-1 (red
wire for Power) and Pin-6 (Green for Ground).
3.
Connect the RS232 card to your PC with a male to female DB-9 cable.
4.
Turn your power supply on and follow instructions for using Lin Command.
Mating Connectors
A DB-9 cable is provided with
every SilvePak17C motor. The
opposite end has flying leads and
a 3-pin connector for RS485
communication.
Lin Part # 90-044
