8
Ersatzteile für klassische britische Fahrzeuge
Instruction to use mobile auto lift
(Part no. 492893)
LIMORA main office
Industriepark Nord 19-21
D - 53567 Buchholz
Jaguar:
+49 (0) 26 83 - 70 61
Triumph:
70 62
Mini:
70 63
MG:
70 64
Austin Healey:
70 65
Fax:
70 59
E-Mail: [email protected]
LIMORA Aachen
Feldstraße 41
D - 52070 Aachen
Tel:
+49 (0) 241 - 55 939 0
Fax:
+49 (0) 241 - 55 939 20
E-mail: [email protected]
Nous parlons français
Wij spreken nederlands
LIMORA Berlin
Wiebestraße 36-37
D - 10553 Berlin
Tel: +49 (0) 30 - 25 93 92 30
Fax: +49 (0) 30 - 25 93 92 33
E-Mail:
LIMORA Düsseldorf
Harffstraße 110a
D - 40591 Düsseldorf
Tel:
+49 (0) 211 - 98 471 01
Fax:
+49 (0) 211 - 98 471 08
E-Mail: [email protected]
LIMORA Stuttgart
Graf-Zeppelin-Platz 1
(Wolfgang-Brumme-Allee 55)
D - 71034 Böblingen
Tel:
+49 (0) 70 31 - 306 95 10
Fax:
+49 (0) 70 31 - 306 95 12
E-Mail:
LIMORA
Hamburg
Hauptstraße 49 /
Bl. Chaussee
D - 22869 Hamburg-Schenefeld
Tel:
+49 (0) 40 - 553 53 15
Fax:
+49 (0) 40 - 55 77 32 38
E-Mail: [email protected]
LIMORA Paris
Tel:
+33 (0) 139 - 570 599
Fax:
+33 (0) 139 - 570 699
LIMORA Polska
E-Mail: [email protected]
LIMORA online
www.Limora.com
New
Safety instructions
• Do not exceed the capacity indicated.
• Once the Ioad is lifted, it is imperative that the Ioad is locked by means of the
anti-tilt arm.
• It is forbidden to work under the vehicle without having first positioned it on jack
stands.
• The anti-tilt arm gives additional safety, but does not remove the need to use
jack stands.
• Use a hard, Ievel non-slippery surface, suitable for supporting the Ioad.
• Check that the Ioad is stable on the jack. Make sure that there is no risk of it tilting
or slipping.
• Do not try to move the Ioad when it is resting on the jack.
• Never use a damaged or worn jack.
• Do not modify this item.
• Do not drive onto this jack.
• This jack is exclusively designed for Iifting cars. Any other use is forbidden.
• While Iifting or lowering a car, do not allow anyone other than the operator to
approach the vehicle.
Read these instructions carefully before using the Iift. This manual is an integral part
of the item and must always accompany it.
Fellow the drill's instructions for use. In particular, because of the risks presented by
the electrical supply, do not use where water is present.
We advise the use of a class II drill. Otherwise, install a 30 mA differential circuit
breaker on its supply.
When Iifting or lowering, it is forbidden to keep the vehicle balanced on the Mini Lift.
You must Iet the vehicle rest freely on the front or rear wheels. The procedure for
having the 4 wheels lifted is described in the section "tilting". Non-respect of these
recommendations may cause damage to property and people.
Art.-Nr. 497824 (LC19042012)
