14
Ersatzteile für klassische britische Fahrzeuge
Instruction to use mobile auto lift
(Part no. 492893)
LIMORA main office
Industriepark Nord 19-21
D - 53567 Buchholz
Jaguar:
+49 (0) 26 83 - 70 61
Triumph:
70 62
Mini:
70 63
MG:
70 64
Austin Healey:
70 65
Fax:
70 59
E-Mail: [email protected]
LIMORA Aachen
Feldstraße 41
D - 52070 Aachen
Tel:
+49 (0) 241 - 55 939 0
Fax:
+49 (0) 241 - 55 939 20
E-mail: [email protected]
Nous parlons français
Wij spreken nederlands
LIMORA Berlin
Wiebestraße 36-37
D - 10553 Berlin
Tel: +49 (0) 30 - 25 93 92 30
Fax: +49 (0) 30 - 25 93 92 33
E-Mail:
LIMORA Düsseldorf
Harffstraße 110a
D - 40591 Düsseldorf
Tel:
+49 (0) 211 - 98 471 01
Fax:
+49 (0) 211 - 98 471 08
E-Mail: [email protected]
LIMORA Stuttgart
Graf-Zeppelin-Platz 1
(Wolfgang-Brumme-Allee 55)
D - 71034 Böblingen
Tel:
+49 (0) 70 31 - 306 95 10
Fax:
+49 (0) 70 31 - 306 95 12
E-Mail:
LIMORA
Hamburg
Hauptstraße 49 /
Bl. Chaussee
D - 22869 Hamburg-Schenefeld
Tel:
+49 (0) 40 - 553 53 15
Fax:
+49 (0) 40 - 55 77 32 38
E-Mail: [email protected]
LIMORA Paris
Tel:
+33 (0) 139 - 570 599
Fax:
+33 (0) 139 - 570 699
LIMORA Polska
E--Mail: [email protected]
LIMORA online
www.Limora.com
New
Safetynut
The drive nut for the Ioad can wear over time or if it is badly lubricated. In this case,
a safety device holds the Ioad, but it is no Ionger possible to Iift or lower it. Do not
try to repair the Mini Lift so that you can continue to use it. Only specialists must be
entrusted with the repair.
The operation of this nut can be checked via the inspection hole no. 7, situated on
the tube no. 6. To do this:
• Lift the Mini Lift to approx. mid-height
• The threaded tube no. 8 has a hole which must be lined up with the inspection
hole no. 7
• If the nut is visible through the inspection hole, this is because it has been
damaged. Stop using the Mini Lift and send it to a specialist for repair.
The nut is in good operational order if it is not visible through the inspection
hole.
Scrapping
If the Mini Lift is disposed of:
• The grease coming from the drives or the threaded rods must be removed in
accordance with the standards in force in the country where it is installed.
• All the metal parts can be recycled; rubber runners must be removed in accordance
with the standards in force in the country where it is installed.
