LIMIT 98, Operating Manual

Page: 8 / 156

4
MIN/MAX/DIF/AVG (6)
EMS Setup (7)
Trigger free setup (8)
High alarm setup (9)
High alarm value (9)
Low alarm setup (10)
Low alarm value (10)
Measuring unit (11)
Select Min, Max, Dif, Avg function
Change value
Select On or OFF
Select On or OFF
Change value
Select On or OFF
Change value
Select °C or °F
6. MAX/MIN/AVG/DIF function
6.1 Press MODE 1 time to select MAX / MIN / AVG / DIF function (shown below),
6.2 Press arrow UP or DOWN key to change between the different functions.
6.3 The value of selected function will be shown in the secondary display.
MAX = shows the highest value in the secondary display.
MIN = shows the lowest value in the secondary display.
AVG = shows the average value in the secondary display.
DIF = shows the difference between highest and lowest value in the secondary display.
7. Emissivity setup
7.1 Press Mode key 2 times or until symbol is flashing to enter emissivity setup (shown below).
7.2 Press UP or DOWN arrow key to select desired value according to Emissivity values table.
Note: Emissivity can be adjusted from 0.01 to 1.0. Pressing the key shortly will result in value changing 1
digit at the time and holding down the key down will result in counting continually.
Instrument will exit setup after 5 seconds if there are no operations.
8. Trigger Free Measurement
8.1 Press Mode key 3 times to enter trigger free measurement setup (shown below) or until icon is
flashing on the LCD screen.
English
GB