LIMIT 272500109, Operating Manual

Page: 7 / 68

5
7.2 CNR angle
7.2.1 Press MITRE key (5) to move to the CNR indicator.
7.2.2 The CNR indicator will flash and show last stored value, adjust the arms (6) & (8)
towards the walls to find the corner angle.
7.2.3 Press the MITRE key (5) for >2 seconds. The displayed value will flash once and the
corner (CNR) angle is now stored in memory.
CNR
HOLD/SU
P
ON
/OFF
MIT
RE
SP
R/CNR/MTR/B
VL
RESET
MITRE
CNR
7.3 MTR angle
7.3.1 Press the MITRE key (5) to enter MTR and read the calculated mitre angle for
adjusting the saw.
MITRE
MTR
7.4 BVL angle
7.4.1 Press the MITRE key (5) to enter BVL and read the calculated bevel angle for
adjusting the saw.
MITRE
BVL
7.5 Read all angles
7.5.1 To check the stored angles, press the MITRE key (5) to go from value to value.
7.5.2 Press the ON/OFF key (4) at any time to exit compound mode.
8. Battery installation or replacement
8.1 Batteries should be replaced when the symbol (Pic 1) appears.
8.2 Open batter lid (Pic 2) and replace the batteries (Pic 3).
1 2 3
GB