manualshive.com logo in svg

Limerick PJ's Comfort, Owner'S Manual

Limerick PJ's Comfort – Enhance your bedtime experience with our cozy and stylish sleepwear. Enjoy maximum comfort and relaxation, providing a delightful way to unwind after a long day. For easy instructions on usage and care, download our user manual for free at manualshive.com. Embrace the tranquility and upgrade your sleep routine today.

Share
Download
background image

Page 13

Controls and Features

and feel comfortable with your 

PJ’s Comfort

 breast pump. The cycle 

speed is used to fine-tune the suction rhythm to best mimic your 
baby’s suckling.

Vacuum adjustment knob

The 

vacuum adjustment knob

 controls the suction strength 

(vacuum) for balancing effectiveness and comfort and will also slow 
down cycle speed as vacuum is increased. Rotating the 

vacuum 

adjustment knob 

to the right increases the strength and rotating the 

knob to the left decreases the strength. A vacuum setting of 1 (one) 
applies a low suction strength (vacuum). A vacuum setting of 30 
(thirty) applies a high suction strength (vacuum). Your 

PJ’s Comfort

 

breast pump always maintains a slight vacuum.

Since each mother/baby couple’s breast-feeding experience is 
different, the adjustment of these knobs will be an individual choice. 
The goal is to adjust the suction rhythm (cycle) to what best mimics 
your baby’s sucking pattern and to adjust the suction strength 
(vacuum) to a comfortable setting. Note that the vacuum setting will 
also affect the suction rhythm (cycle). Increasing the vacuum level 
will decrease the number of cycles per minute (slow cycles).

Adjusting the cycle speed will not change the vacuum level. Cycle 
speed is independent of vacuum strength.

When you begin to use 

PJ’s Comfort

 breast pump, it’s recommended 

that you use a fast suction rhythm (cycle) and low suction strength 
(vacuum). The pump is programmed to start at this setting when 
first used or if pump is left off for more than 5 (five) minutes. This will 
create a flutter like sensation and allow for a comfortable setting so 
you can get used to the pump.

After 1-2 minutes of pumping, increase the suction strength (vacuum) 
by rotating the vacuum adjustment knob to the right until it feels 
comfortable and similar to your baby’s suckle.

Summary of Contents for PJ's Comfort














































Reviews:

No comments

Related manuals for PJ's Comfort

Brands by name

Popular brands

Load more brands