Lime Microsystems EVB7, Quick Start Manual

Page: 33 / 81

LMS7002M Quick Starter Manual for EVB7 kit
33 | P a g e
Version: 2.2 Last modified: 29/09/2014
D24
SBEN
Serial port B enable, active low, CMOS
H28 TXFCLK Clock from BBIC to RFIC during JESD207 mode, Port 1
H29 TXD10 DIQ bus, bit 10, Port 1
G27 TXEN TX hard power off
G28
TXD11
DIQ bus, bit 11, Port 1
H31 TXD8 DIQ bus, bit 8, Port 1
H32 TXD6 DIQ bus, bit 6, Port 1
G30
TXD9
DIQ bus, bit 9, Port 1
G31 TXD7 DIQ bus, bit 7, Port 1
H35 TXD4 DIQ bus, bit 4, Port 1
G33 TXD5 DIQ bus, bit 5, Port 1
H37
TXD2
DIQ bus, bit 2, Port 1
H38 TXD0 DIQ bus, bit 0, Port 1
G36 TXD3 DIQ bus, bit 3, Port 1
G37
TXD1
DIQ bus, bit 1, Port 1
F10
G_PWR_DWN
F11 DIO_BUFF_OE
DIO port buffer enable/disable. If ‘1’ – disable, ‘0’ – enable.
C31 SDA I2C port data line, CMOS
C30
SCL
I2C port clock line, CMOS
D12
RSSI_ADC0
Analog test point
C10 RSSI_ADC1 Analog test point
6.2.2. Digital I/O connector pin description
The DIO card can be connected to EVB 7 via Digitail I/O connector J7. Connectr has 44 pins.
The pin description showed in the Table 3.
Table 3 Digital I/O connector pin description
Pin number Schematic name Function
1
TXD0
DIQ bus, bit 0, Port 1
2 TXD1 DIQ bus, bit 1, Port 1
3 TXD2 DIQ bus, bit 2, Port 1
4
TXD3
DIQ bus, bit 3, Port 1
5
TXD4
DIQ bus, bit 4, Port 1
6 TXD5 DIQ bus, bit 5, Port 1
7 TXD6 DIQ bus, bit 6, Port 1
8
TXD7
DIQ bus, bit 7, Port 1
9 TXD8 DIQ bus, bit 8, Port 1
10 TXD9 DIQ bus, bit 9, Port 1
11 TXD10 DIQ bus, bit 10, Port 1
12
TXD11
DIQ bus, bit 11, Port 1
13 TXFCLK Clock from BBIC to RFIC during JESD207 mode, Port 1