10
User2.cube or User3.cube.
- Copy the User-defined Lut table to flash disk and insert it to the device,
the screen displays a prompt message to show whether to upgrade.
Select upgrade, the device will be loading automatically in a black
screen and then restart after finishing loading.
Requirements for flash disk
Format: FAT32
Memory: <16G
File directory: root directory
Must be formatting before using it
Please note that the responding time for loading user-defined Lut
table will be a bit slower. Please wait patiently.
- The device only supports loading one table at a time. If needs to load
more than one tables, please load them one by one.
HDR
Select HDR from among [Off], [Auto], [HDR10].
HDR is only available under HDMI 1 signal input.
HDR under AUTO or DHR10 mode, and the input signal support HDR, the
below function is disabled:
Contrast, Brightness, Saturation, Hue, Sharpness, Color Space, BackLight
Color Temperature
[Auto]
Automatically recognize whether the input HDMI signal supports HDR. If it
supports, the input signal shows as the HDR10 performance.
If it doesn’t,
HDR function is disabled. It
’s suggested select [Auto] when use HDR
function.
[HDR10]
Do not recognize whether the input HDMI signal supports HDR, it will
activate the HDR function enforcedly when input signal. If the input signal
does not support the HDR function, the image displays abnormal color.
Backlight Mode
Select Backlight Mode from among [Standard], [Outdoor], [User].
Backlight
It is only available under [User] mode.
Temperature
Adjust the color temperature to make the image warmer (Yellow) or colder
(Blue). Increase the value to make the image be warmer, decrease the value
to make the image be colder. User can use this function to strengthen, weaken
or balance the image color according requirements. The standard white light
