BACHMANN EUROPE Plc
N 1:160
5
Starting Up Your Direct Current Model (DC)
Your model is wired in the basic setting so that all wheels collect current. Turn switch
S1 to the stop function if
you are running in block section operation or want to automatically stop in a terminus (also refer to
Figure 2).
This function is only available with direct current operation. The inside LED lighting installed is turned on in the
basic setting and you can use switch
S2 to turn the inside lighting on or off. These two switches also appear
directly under the roof of wagon unit
A on the main board. Lift the component of the air conditioning (K) to use
this switch.
Fig. 2
K
D
J
unit A
S2
S1
aagssh
OFF
ON
aagssh
B
stop function
A
all wheels contact
Service and Care of Your Model
You should service your motor coach at regular intervals to guarantee a long service life. You do not have
to open your model; just place it on its roof on a soft surface as in
Figure 3 without damaging the parts at-
tached to the roof or pantographs. Clean the wheel contacts with a cotton bud soaked in spirits. Then clean
the wheels. Never turn the drive wheels by hand. After cleaning, lubricate the bearings (
L) shown in the figure
and the gears (
R) with a drop of machine oil. It makes sense to do this service work every 30-40 hours of
operating time.
R
R
Fig. 3
L
L
L
L
L
L
L
L
R
R
