54
After password function is ON, press
key to display frame of input password on the
screen.
When protocol is MLP1, push joystick up or down to select number 0~9 and press
key to
confirm. Select numbers will become to "*".
Repeat above steps until passwords have been completed. If password is correct, setting menu
will be displayed.
When protocol is MLP2, press number 0 ~ 9 key on the keyboard to input, and then press
key to confirm. If password is correct, setting menu will be displayed.
Note: If not enter password within 10 sec or input password is wrong, "Invalid password" will
be show on the screen. Primary password is "1111".
5. Input Password
CAM SETUP
CTRL 1
ENT
IRIS
O
ENTER PASSWORD
Restore Factory Defaults
After getting in dome setting menu, push joystick down to select <FACTORY INITIAL>, and
then press
key into factory initial setting.
CAM SETUP
CTRL 1
1. Display the Restore Function Initialization Menu
RESTORE FACTORY DEFAULTS
RESTORE
BACK
EXIT
ALL
Push joystick down to select <RESTORE>, and then push joystick left or right to select <ALL>.
Press
key to confirm, and "Are you sure continue" will be displayed on the screen.
Press
key again, and then to do factory initialization for all.
Note: "PLEASE WAITING FACTORY INITIALIZATION"will show on the screen after
confirmation.
2. Factory Initial for All
CAM SETUP
CTRL 1
CAM SETUP
CTRL 1