53
Password Function Menu
After getting in dome setting menu, push joystick down to select <PASSWORD>, and then
press
key into password function menu.
CAM SETUP
CTRL 1
1. Display the Password Setting Menu
PASSWORD
ENABLE PASSWORD
<EDIT PASSWORD>
BACK
EXIT
OFF
Push joystick down to select <ENABLE PASSWORD>, and then push joystick left or right to
select <ON> or <OFF>.
2. Password Setting
Push joystick down to select <EDIT PASSWORD>, and then press
key into edit
password setting.
Push joystick left or right to select number 1~9, and then press
key to confirm. The
number that is selected will be displayed on the edit column.
Repeat above steps until password setting has been completed.
Push joystick down to select <OK>, and then press
key to confirm and back to
password function menu, or push joystick down to select <CANCEL>, and then press
key to cancel password. These numbers of Edit column will be reset to "1111".
Note: When edit password setting and camera recording function are simultaneously performed,
please stop recording function first; otherwise frame of password setting will be recorded,
too.
3. Edit Password Setting
CAM SETUP
CTRL 1
CAM SETUP
CTRL 1
CAM SETUP
CTRL 1
EDIT THE PASSWORD
0 1 2 3 4 5 6 7 8 9
1 1 1 1
OK
CANCEL
To modify password after editing password completed, please get in <EDIT PASSWORD>
again to edit.
If password function is ON, previous passwords have to enter on the setting menu first, and
then do modifying password.
4. Modify Password
CAM SETUP
CTRL 1