CAM SETUP
CTRL 1
CAM SETUP
CTRL 1
CAM SETUP
CTRL 1
CAM SETUP
CTRL 1
42
(5) IR Cut Filter Setting (PIH-7622DH/7635DH)
Push joystick down to select <IR CUT REMOVE>, and then push joystick left or right to
select mode.
AUTO: When light level is over 30 lux, IR Cut Filter switches IN automatically to
produce color image. When light drops below 10 lux, IR Cut Filter switches
OUT automatically to produce monochrome image. Under monochrome mode,
sensitivity is increased to 0.01 lux and can be used with IR illuminators.
When selection is <AUTO>, press
key into IR Cut Setting menu.
Push joystick down to select <IR SENSITIVITY>, and then push joystick left or
right to select sensitivity steps. (01 ~ 15)
Note: When IR sensitivity setting value is low and lightness is darker, IR CUT
FILTER will be performed.
AUTO
SCHED.
IN
OUT
CAM SETUP
CTRL 1
ICR AUTO
IR SENSITIVITY
BACK
EXIT
08
SCHED.: IR CUT FILTER switches automatically between Day mode and Night mode
by schedule of time setting.
When selection is <SCHED.>, press
key into ICR SCHEDULE Setting menu.
Push joystick down to select <DAY
NIGHT>, and then press
key into time
setting. Push joystick left or right to select time of DAY
NIGHT. Then press
key again to next item.
18 : 00
18 : 00
18 : 00
Push joystick down to delect <NIGHT
DAY>, and then press
key into time
setting. Push joystick left or right to select time of NIGHT
DAY. Then press
key again to next item.
06 : 00
06 : 00
06 : 00
ICR SHCEDULE
DAY
NIGHT
NIGHT
DAY
BACK
EXIT
18:00
06:00
CAM SETUP
CTRL 1
CAM SETUP
CTRL 1
CAM SETUP
CTRL 1
CAM SETUP
CTRL 1
CAM SETUP
CTRL 1