Chapter 5.
Before Access PIH-036/038IP
Before accessing PIH-036/038IP, make sure that camera's analog BNC output, RJ-45 network
cable, and PIH-036/038IP's power cable are properly installed. For setup IP address, please
consult your network administrator for available IP addresses. The default IP address of PIH-036/
038IP is 192.168.0.100. User can also use default IP address to verify PIH-036/038IP's network
connection.
7
Chapter 5-1.
Configure IP address using IPScan Utility
To configure IP address using IPScan utility, copy IPScan application from installation CD to
your local PC or execute IPScan software from installation CD directly. To change IP address,
subnet mask, gateway, or HTTP port, please follow steps below:
1. Run IPScan utility.
2. Click on Refresh button. All available devices get listed in Device list box.
3. Select the device item in Device list box.
4. Edit or modify addresses in IP, Subnet Mask, Gateway, or HTTP Port edit box.
5. Click on Apply button to configure the settings.
6. Click on Refresh button to verify the settings.
